Pool Builders Pool Shop Talks Troubleshooting the Top 5 Issues Pool Owners Face With A New Pool

If you’re a pool owner, you probably know that keeping your pool in perfect working condition can sometimes be a challenge. From low salt warnings to calcification buildup, there are a variety of issues that can arise with your pool. Fortunately, there are several troubleshooting steps you can take to resolve these common pool problems. In this blog post, we’ll discuss the top 5 troubleshooting ways to resolve issues with your pool.

• Low Salt Warning: If your pool is displaying a low salt warning, it may be time to add more salt to the water. Before adding salt, it’s important to test the water to ensure that the salt levels are actually low. Once you’ve confirmed that the salt levels are low, you can add the appropriate amount of salt according to your pool’s specifications.

It’s essential to maintain the proper salt level in your pool to ensure that the chlorine generator can function effectively and keep your pool clean and safe for swimming. If you receive a low salt warning, you should test the salt level in your pool using a salt testing kit and add salt as needed to bring it back to the recommended level. Failure to address a low salt warning can result in inadequate sanitation of your pool water and potentially lead to algae growth and other water quality issues.

• Completing a Backwash: Backwashing your pool filter is an important maintenance task that helps keep your pool water clean and clear. If you notice that your pool water is cloudy or dirty, it may be time to complete a backwash. To backwash your pool filter, simply follow the manufacturer’s instructions for your specific filter type.

1. Turn off the pool pump to ensure it is not running during the backwashing process.
2. Locate the backwash valve on your Pentair or Astral Media Filter. This valve is usually attached to the filter.
3. Move the multiport valve on the filter to the “backwash” position. This can usually be done by turning the handle on the valve to the designated position.
4. Turn on the pump and let it run for about 1-2 minutes. This will reverse the flow of water through the filter and flush out any trapped debris.
5. Turn off the pump and move the multiport valve to the “rinse” position. Turn the pump back on and let it run for another 1-2 minutes to rinse out any remaining debris.
6. Turn off the pump again and move the multiport valve back to the regular filter setting.
7. Turn on the pump and your filter should now be backwashed and ready for normal operation.
8. It is recommended to backwash your filter every 2-4 weeks or as needed based on the pressure gauge readings.

• Adjusting Your Chlorinator: If you’re experiencing issues with chlorine levels in your pool, you may need to adjust your chlorinator up or down. If your pool water is turning green or algae is starting to form, you may need to increase the chlorine output. On the other hand, if your pool water is experiencing high chlorine levels, you may need to lower the output. Adjusting your chlorinator can help maintain proper chlorine levels in your pool and keep your water clean and safe for swimming.

      Click HERE for an Astral Chlorinator

Click HERE for a Pool Controls Chlorinator

4. Water Chemistry Testing: Regularly testing your pool water chemistry is essential for maintaining proper water balance and preventing issues like algae growth and cloudy water. Testing your pool water for pH, chlorine, alkalinity, and other factors can help you determine if any adjustments need to be made. It’s recommended to test your pool water at least once a week, or more frequently if you notice any changes in water quality.

5. Removing Calcification: Calcification buildup can occur on pool surfaces, equipment, and even the pool walls. To remove calcification, you can use a pool brush or scrubber to scrub the affected areas. For more stubborn calcification, you may need to use a specialized pool cleaner or calcium remover. Regularly cleaning and maintaining your pool surfaces can help prevent calcification buildup and keep your pool looking clean and beautiful.

In conclusion, maintaining a healthy and clean pool requires regular maintenance and troubleshooting. By following these top 5 troubleshooting ways to resolve common pool problems, you can ensure that your pool remains in great condition and ready for swimming all season long. Remember to regularly test your water chemistry, adjust your chlorinator as needed, complete backwashes, address low salt warnings, and remove calcification to keep your pool in top shape. With proper care and attention, you can enjoy a sparkling clean pool that you and your family can enjoy all year round.